The smart choice in single side label applicators.
MGL Side Label Applicator


Photo Here


  Product Name: SSL (single side label) Series
Weight: < 500lbs (226.79 Kg)
Power Requirements: 120V A/C 50/60 Hz < 5 Amps
Conveyor Belt length: - 6' (1.8m) standard 8' (2.43m) to 24' (7.3m) is available
Labeling head type: Roll-on apply standard (air tamping heads available)
Label Type: Die-cut pressure sensitive labels
Label Roll Size: 12" (30.5cm) O.D. on 3" (7.6cm) I.D. roll standard (larger roll support is special order)
Label Width: up to 4" (101.6mm) wide standard (larger widths available)
How it works for you

Pressure sensitive label application The MGL Econotac side labeler is shown here applying a 9" x 12" label to a round pail. The product is oriented into the wrap station to insure 100% adhesive contact to the product when the label is applied.

The same unit can handle various size labels and containers.

Features Benefits
   • Econotac Heads     High reliability  
   • Safety Drive System     Very safe for operator
and product
roll-thru design
   • Very cost effective     Lower cost to own or operate  
  Status signal
For indicating low label level and out of labels. (See web break option below.)
Hot stamp imprinter
For stamping date code or run number onto label.
Zero downtime options
A permanent or mobile redundant labeling head.
Clear label sensor
For detecting clear labels that are missing index mark.
Web break sensor
For warning if label breaks or machine runs out of labels.
Hugger belt
For regulating product flow - blocks overfeeding.
Wrapping belt
For rotating product while label is being applied.
Accumulator Table
For storing products after labels are applied simplifying batch pickup by system operator.
Fan fold label feeder
For feeding printed fan fold labels into a labeling system.
About MGL | Site Map | Privacy Policy | Contact Us | Home
Copyright ©1995-2005 MGL International, Inc.     All Rights Reserved     Last Revised 03/07/2005